Q.1
As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
Q.2
The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
Q.3
The length of runway is increased per 300 m rise above M.S.L.
Q.4
In Instrumental landing system, the middle markers are located
Q.5
Assertion A : The ratio of arriving and departing aircrafts influences the airport capacity:
Reason R : Landing operation is generally given priority over the taking off operation.
Select your answer based on the coding system given below:
Q.6
Assertion A : Airport capacity during IFR conditions is usually less than that during VFR conditions.
Reason R: During clear weather condition (VFR), the aircrafts on final approach to runway can be spaced closer during poor visibility conditions.
Select your answer based on the coding system given below:
Q.7
Calm period is the percentage of time during which wind intensity is less than
Q.8
The length of clear zone for none instrument runway of a small aircraft is
Q.9
Pick up the correct statement from the following:
Q.10
Pick up the correct statement from the following:
Q.11
Pick up the correct statement from the following:
Q.12
Runway threshold is indicated by a series of parallel lines starting from a distance of
Q.13
According to I.C.A.O. the recommended length of air ports is decided on
Q.14
Pick up the correct statement from the following:
Q.15
Pick up the correct statement from the following:
Q.16

For night landing, the thresholds are lighted

  • green
  • red
  • white
  • yellow
Q.17

Pick up the correct statement from the following:

  • F.I.R. stands for flight information regions
  • F.I.C. stands for flight information centre
  • Radius of control area is 160 km
  • Radius of control zone is 40 km
  • All the above.
Q.18

According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by

  • Seven English alphabets
  • Last Seven English alphabets
  • First Seven English alphabets
  • First seven numbers
  • None of these.
Q.19

The bearing of the runway at threshold is 290°, the runway number is

  • N 70° W
  • 290°
  • 29°
  • W 20° N
Q.20

The strength of winds is measured with the help of

  • Benfort scale
  • Wind indicator
  • Barometres
  • None of these.
Q.21

For the taxiways, the following statement is true

  • The maximum longitudinal grade is 3%
  • The permissible rate of change of grade is 1%
  • The permissible transverse grade is 1.5%
  • All the above.
Q.22

The lift off distance is the distance along the centre of the runway between the starting point and

  • end of the runway
  • end of stopway
  • point where air craft becomes air borne
  • point where air craft attains a height of 10.7 m
  • none of these.
Q.23

The distance between main gears ism, and the distance of nose gear from centre of main gears ism. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is

  • 12.30 m
  • 11.30 m
  • 10.30 m
  • 9.30 m
Q.24

From the end of an instrumental runway, the approach surface rises outwards

  • 1 in 20
  • 1 in 30
  • 1 in 40
  • 1 in 50
Q.25

According to I.C.A.O. the recommended length of air ports is decided on

  • sea level elevation
  • standard sea level temperature (15°C)
  • effective gradient percentage
  • all the above.
Q.26

The best direction of a runway is along the direction of

  • longest line on wind rose diagram
  • shortest line on the wind rose diagram
  • line clear of wind rose diagram
  • none of these.
Q.27

The landing and take off of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding

  • 10°
  • 20°
  • 30°
  • 40°
Q.28

Pick up the correct statement from the following:

  • Runway edge from the landing side, is called threshold
  • Localizer indicates to the pilot his position with respect to the proposed alignment
  • The glide slope indicates the correct angle of descent
  • L.O.M. and L.M.M. help the pilot to judge his position for the runway
  • All the above.
Q.29

Pick up the correct statement from the following:

  • Approximate geometric centre of the landing area, is called air port reference point
  • The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
  • The location of the air port on a map is the position of air port reference point
  • All the above.
Q.30

To cope up high temperature of 196°C, the taxi ways and aprons are constructed with

  • asphaltic concrete
  • rubberised tar concrete
  • plain concrete
  • epoxy asphalt concrete
  • all the above.
0 h : 0 m : 1 s