If the dimensions of a rectangular section of a short column arecm xcm, its unsupported length should be restricted to
Pick up the correct statement regarding columns.
In compression members, the lap length of a bar should not be less than
The minimum compressive strength oncm cubes of Mgrade concrete at 7 days, should be a minimum of
The distance between, rivet line and the nearest edge of a joint not exposed to weather, is taken (where t is thickness in mm of the thinner outside plate).
The slenderness ratio of a tie in a roof truss if subjected to action of wind and seismic forces, should not be greater than
The grade of reinforced concrete to be used in sea water or structures exposed to sea water should be
The minimum horizontal distance between two parallel main reinforcing bars, is
The outstand of stiffeners should be (where t is the thickness of flat).
For concreting of shallow sections with vibration, the work ability of concrete should be
If the specified thickness of a footing iscm, the depth of the form work may be tolerated from
If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = afck N/mm2 where the value of a is
Pick up the correct statement from the following:
The slenderness effect of a wall is considered if the effective height of the wall exceeds the thickness
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least ......of main reinforcement
The spans of filler joists supporting a slab may be considered approximately equal if the longest span does not exceed the shortest span more than
Columns are designed for a minimum eccentricity equal to 1/(unsupported length ofthe column), subject to a minimum of
All reinforcement should be free from
The concrete is deemed not to comply with the strength requirements if the strength is less than the greater of
Please disable the adBlock and continue. Thank you.