Q.1
Doubling the diameter of the coil in an inductor:
Q.2
If the current gain is 200 and the collector current is 100 mA, the base current is
Q.3
What is the smallest number of polarities required for current flow?
Q.4
A diode is in series with 220W. If the voltage across the resister is 4V, what is the current through the diode?
Q.5
What is the barrier potential of a silicon diode at room temperature?
Q.6
The Norton current is sometimes called the
Q.7
When a parallel RLC circuit is operating at its resonant frequency:
Q.8
For normal operation of the transistor, the collector diode has to be
Q.9
Two diodes are in series. The first diode has a voltage of 0.75 V and the second has a voltage of 0.8 V. If the current through the first diode is 500 mA, what is the current through the second diode
Q.10
The graph of current gain versus collector current indicates that the current gain
Q.11
At room temperature a conductor has low many holes?
Q.12
A current source has an internal resistance of 100 kW. What is the largest load resistance if the current source must appear stiff?
Q.13
In a step-down transformer, which is larger?
Q.14
Which one of the following principles best describes the basic operation of an electromagnet?
Q.15
The transistor has a collector current of 2 mA. If the current gain is 135, what is the base current?
Q.16
Which one of the following statements is true for the currents in a parallel RL circuit?
Q.17
When the Q point moves along the load line, the voltage increases when the current
Q.18
Current and voltage are said to be in phase when:
Q.19
Silicon atoms combine into an orderly pattern called a
Q.20
The rotating coil of wire in an electric motor is called the:
Q.21
Which one of the following statements is true?
Q.22
Which one of the following statements is true for the currents in a series RC circuit?
Q.23
A transistor has how many doped regions?
Q.24
What is the total resistance of a series circuit that contains four resistors having values of 220W, 470W, 1W, and 1.2W?
Q.25
Holes act like:
Q.26
How may valence electrons does a silicon atom have?
Q.27
The total inductance of a series inductor circuit is:
Q.28
Determine the resistance value and tolerance of a resistor that has the following color bands; first band is red, second band is red, third band is orange, and the fourth band is gold
Q.29
Which one of the following is most likely used for measuring the rate of electron flow?
Q.30
The voltage across a 1N4001 is 0.93V when the current is 1A. What is the power dissipation of the diode for these values?
0 h : 0 m : 1 s