Q.1

After coding a document into a digital signal, it can be sent by telephone, telex or satellite to the receiver where the signal is decoded and an exact copy of the original document is made. What is it called?

  • Telex
  • Word processor
  • Facsimile
  • Electronic mail
  • None of the above
Q.2

Ethernet networks can be cabled in a number of topologies, depending on what works best in each environment. As more nodes are added, the efficiency of Ethernet decreases. Select the best answer as to why Ethernet becomes less efficient as size increases.

  • Network collisions occur
  • Repeaters cannot increase the signal strength sufficiently
  • Cable terminators do not reflect the signal properly
  • Cable terminators do not absorb the signal properly
  • "Line echo" occurs due to the impedance of the cable
Q.3

Which of the following divides the high speed signal into frequency bands?

  • t-switch
  • modem
  • frequency-division multiplexer
  • time-division multiplexer
  • None of the above
Q.4

Which of the following statements is correct?

  • Protocol converters are the same as multiplexers
  • Protocol converters are the same as TDMs
  • Protocol converters are usually not operated in pairs.
  • Protocol converters are usually operated in
  • None of the above
Q.5

A 4 KHz noiseless channel with one sample everyper sec, is used to transmit digital signals. Find the bit rate (bits per second) that are sent, if CCITT 2.Mbps encoding is used.

  • 500 Kbps
  • 32 Kbps
  • 8 Kbps
  • 64 Kbps.
Q.6

How can you see the address of the DHCP server from which a client received its IP address?

  • By using Advanced Properties of TCP/IP
  • By using IPCONFIG/ALL
  • By using DHCPINFO
  • By pinging DHCP
  • None of the above
Q.7

What is the name of the device that converts computer output into a form that can be transmitted over a telephone line?

  • Teleport
  • Modem
  • Multiplexer
  • Concentrator
  • None of the above
Q.8

How many class A, B, and C network IDs can exist?

  • 2,113,658
  • 16,382
  • 126
  • 128
  • None of the above
Q.9

The fundamental requirements of private-to-public network interconnection methods which need to be provided in gateways is/are

  • universal accessibility for private network Data Terminal Equipment (DTE)
  • adequate cost control mechanisms for administration of the private networks
  • to assign address to private network DTEs
  • a and b both
  • None of the above
Q.10

A network that requires human intervention of route signals is called a

  • bus network
  • ring network
  • star network
  • T-switched network
  • None of the above
Q.11

The difference between a multiplexer and a statistical multiplexer is

  • Statistical multiplexers need buffers while multiplexers do not need buffers
  • Multiplexer use X.25 protocol, while statistical multiplexers use the Aloha protocol
  • Multiplexers often waste the output link capacity while statistical multiplexers optimize its use
  • Multiplexers use Time Division Multiplexing (TDM) while statistical multiplexers use Frequency Division Multiplexing (FDM)
  • None of the above
Q.12

Which of the following is separated by a subnet mask?

  • DHCP scopes
  • Network ID and host ID
  • Domains
  • Subnets
Q.13

The signal to noise ratio for a voice grade line is 30.1 dB (decibels) or a power ratio of 1023:The maximum achievable data rate on this line whose spectrum ranges fromHz toHz is

  • 6200 bps
  • 9600 bps
  • 34000 bps
  • 31000 bps
  • None of the above
Q.14

Distributed Queue Dual Bus is a standard for

  • LAN
  • MAN
  • WAN
  • Wireless LAN.
  • LAN and MAN
Q.15

You are working with a network that is 172.16.0.0 and would like to have the maximum number of hosts per subnet. This assumes support for eight subnets. What subnet mask should you use?

  • 255.255.192.0
  • 255.255.224.0
  • 255.255.240.0
  • 255.255.248.0
  • 255.255.255.0
Q.16

Which of the following files is used for NetBIOS name resolution?

  • HOSTS
  • LMHOSTS
  • ARP
  • FQDN
  • None of the above
Q.17

What is the number of separate protocol layers at the serial interface gateway specified by the X.standard?

  • 4
  • 2
  • 6
  • 3
  • None of the above
Q.18

Many data communication networks have been established which provide a wealth of on-demand information services to people at home. What is the name of the system which provides an interactive, graphics-rich service that permits user to select what they want?

  • Teletex system
  • Fax system
  • Videotex system
  • Microwave system
  • None of the above
Q.19

Which IP address class has few hosts per network?

  • D
  • C
  • B
  • A
  • None of the above
Q.20

Microprogramming is

  • assembly language programming
  • programming of minicomputers
  • control unit programming
  • macro programming of microcomputers
  • None of the above
Q.21

Which of the following device copies electrical signals from one Ethernet to another?

  • bridge
  • repeater
  • hub
  • passive hub
  • None of the above
Q.22

Stephanie is in charge of a small network and wants to make it simple but secure. The users want to have full control over their data and still be able to share data with the rest of the office. The networking knowledge of the office staff is basic. Which network(s) would be the best for Stephanie to set up?

  • Peer-to-peer
  • Master domain
  • Server-based
  • WAN
  • Share-level
Q.23

The term "remote job entry" relates to

  • batch processing
  • realtime processing
  • transaction processing
  • distributed processing
  • None of the above
Q.24

Which of the following performs modulation and demodulation?

  • fiber optic
  • satellite
  • coaxial cable
  • modem
  • None of the above
Q.25

Which file transfer protocol uses UDP?

  • NFS
  • TELNET
  • TFTP
  • FTP
  • None of the above
Q.26

In a _____ topology, if there are n devices in a network, each device has n - 1 ports for cables.

  • ring
  • bus
  • star
  • mesh
  • None of the above
Q.27

The 32-bit internet addresswill be written in dotted decimal notation as

  • 148.20.2.30
  • 164.100.9.61
  • 210.20.2.64
  • 128.10.2.30
  • None of the above
Q.28

What is the first octet range for a class C IP address?

  • 192 - 255
  • 192 - 223
  • 192 - 226
  • 128 - 191
  • 1 - 126
Q.29

What is the minimum number of wires needed to send data over a serial communication link layer?

  • 1
  • 2
  • 4
  • 6
  • none of the above
Q.30

Which of the following is not a standard synchronous communication protocol?

  • SDLC
  • SMTP
  • SLIP
  • PAS
  • None of the above
0 h : 0 m : 1 s