The logic family with the highest maximum clock frequency is HS-TTL.

The output current capability for a HIGH output condition is called a source current.

The time it takes for a square wave to go from 10% to 90% of its voltage level is called propagation delay.

The TTL HIGH level source current is higher than the LOW level sinking current.

The maximum output voltage recognized as a LOW by a TTL gate is 2.0 V.

Power-supply decoupling uses a radio-frequency capacitor to short out high frequency spikes.

The lower transistor of a totem-pole output is saturated when the gate output is ________.

When V_GS = 0 on an N-channel MOSFET switch, there is no ________ between the source and the drain.

Fan-out for a typical TTL gate is ________.

A logic probe is placed on the output of a digital circuit and the probe lamp is dimly lit. This display indicates ________.

A logic probe is placed on the input of a digital circuit and the probe lamp blinks slowly, indicating ________.

________ is about twice as fast as P-MOS.

The 74XX series TTL operates using saturated switching in which many of the transistors, when conducting, will be in the saturated condition.

When the outputs of several standard TTL gates are connected together, the gate outputs produce more fan-out.

Usually P-MOS and N-MOS circuits are identical with the exception of the voltage polarities.

Integrated injection logic offers high component density and is easier to fabricate than TTL.

The number of gates that can be connected to a single output without exceeding the current ratings of the gate is called ________.

An open-collector TTL gate ________.

One advantage that MOSFET transistors have over bipolar transistors is ________.

Integrated injection logic offers high component density and is easier to fabricate than TTL.