The normal outputs of a magnitude comparator are ________.
One can safely state that the output lines for a demultiplexer are under the direct control of the:
Basically, a multiplexer changes parallel data inputs to a serial output.
Incandescent 7-segment displays are especially well suited for use in portable battery-operated devices.
A device that selects one of several inputs to be placed on the output is a multiplexer.
A(n) ________ is a combinational logic circuit that compares two input binary quantities and generates outputs to indicate which one has the greater magnitude.
The device that places its input data onto one of several outputs is a ________.
In HDL, a process is usually thought of as a wire connecting two points in a circuit.
A demultiplexer is a device that converts some code to a recognizable number or character.
A device that determines which of two numbers is greater is a comparator.
A 1-of-8 octal decoder has eight outputs and decodes an input of ________ bit(s).
An eight-line multiplexer must have as inputs ________.
For the input values (A0–A3, B0–B3, Data Select = 1) given for the circuit given below, what will be indicated on the displays?
Modern computers transfer data between different devices over a common set of connecting lines called a data bus.
A very important attribute of the conditional signal assignment statement is its sequential operation.
The device that is an application of SOP logic is a multiplexer.
A logic circuit that determines if one input is equal to another is called a comparator.
If by chance more than one of the inputs in an HDL encoder is activated at the same time, the priority encoder ________.
Output 6 of a 74138 octal decoder is selected when it is enabled by a data input of:
A0 = 1 A1 = 1 A2 = 0
Please disable the adBlock and continue. Thank you.