How can parallel data be taken out of a shift register simultaneously?
With a 200 kHz clock frequency, eight bits can be serially entered into a shift register in ________.
A modulus-12 ring counter requires a minimum of ________.
How would a latch circuit be used in a microprocessor system?
If a 10-bit ring counter has an initial state 1101000000, what is the state after the second clock pulse?
In a parallel in/parallel out shift register, D0 = 1, D1 = 1, D2 = 1, and D3 =After three clock pulses, the data outputs are ________.
The group of bits 10110111 is serially shifted (right-most bit first) into an 8-bit parallel output shift register with an initial stateAfter two clock pulses, the register contains ________.
What is meant by parallel load of a shift register?
A sequence of equally spaced timing pulses may be easily generated by which type of counter circuit?
Stepper motors have become popular in digital automation systems because ________.
A 4-bit shift register that receives 4 bits of parallel data will shift to the ________ by ________ position(s) for each clock pulse.
How much storage capacity does each stage in a shift register represent?
Another way to connect devices to a shared data bus is to use a ________.
Ring shift and Johnson counters are:
By adding recirculating lines to a 4-bit parallel-in, serial-out shift register, it becomes a ________, ________, and ________-out register.
What does the output enable do on the 74395A chip?
To operate correctly, starting a ring shift counter requires:
The bit sequence 10011100 is serially entered (right-most bit first) into an 8-bit parallel out shift register that is initially clear. What are the Q outputs after four clock pulses?
Please disable the adBlock and continue. Thank you.