Q.1
ABS brakes:
Q.2
What kind of brakes do most newer heavy-duty trucks use?
Q.3
The application pressure gauge:
Q.4
Which of the following is not part of a vehicle’s air brake system?
Q.5
While driving, spring brakes are generally held in place by:
Q.6
An application pressure gauge shows:
Q.7
Failing to drain air tanks could result in:
Q.8
The ____ between an air compressor and reservoir tank prevents air from escaping if the air compressor has a leak.
Q.9
When parked on a flat surface, you should:
Q.10
In a vehicle with dual parking control valves, once air pressure is lost and the spring brakes come on:
Q.11
Having ABS on only one axle:
Q.12
If your tractor is equipped with ABS but your trailer is not, the ABS:
Q.13
In a vehicle with dual air brakes, a leak in one system ____ the second system.
Q.14
What kind of force must emergency brakes use?
Q.15
Front brake limiting valves were intended to:
Q.16
What can happen if a parking brake is used in very wet weather when temperatures are below freezing?
Q.17
How many air storage tanks are used in an air brake system?
Q.18
In a dual air brake system, air pressure should build from 85 to 100 psi within ____ seconds.
Q.19
If the brake pads rub against the brake drums and create too much heat:
Q.20
If an air compressor is belt-driven, the belt should be routinely checked to ensure that it is:
Q.21
If the low pressure warning signal activates while you are driving, you should:
Q.22
When operating a vehicle with a dual air brake system, the driver should:
Q.23
In a dual air brake system:
Q.24
An emergency brake must be controlled by:
Q.25
If the spring brakes are on, you should:
0 h : 0 m : 1 s