Arkansas CDL Bus 2 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

When asked about the vehicle's oil during the vehicle inspection test, you must be able to do all of the following, except:

Indicate where the dipstick is located.
Show that the oil level is within a safe operating range.
Show that the oil level is above the refill mark.
Show that the oil level is below the refill mark.

Q.2

If you must back up at a student pick-up point, you should:

Back up before the students load the bus.
Let the students load the bus before backing up.
Let half of the students load the bus and then back up to meet the second half.

Q.3

Before evacuating a bus in response to a hazard, a driver should:

Ask the students if they want to leave.
Explain the situation to the dispatcher.
Take their time deciding if an evacuation is necessary.

Q.4

If a driver needs to exit a school bus to ensure all the students have boarded, the driver should:

Leave the bus running.
Turn off the engine and take the key.
Ask another bus driver to keep an eye on their bus.
Ask all students to exit the bus.

Q.5

When approaching a railroad crossing while operating a school bus, you should generally:

Stop between 15 and 50 feet before the nearest rail.
Stop 100 feet before the nearest rail.
Stop 10 feet before the nearest rail.
Continue across the tracks without stopping.

Q.6

The overhead inside rearview mirror should be positioned to display:

The rear tires.
All of the students on the bus.
The floor of the bus.
The ceiling of the bus.

Q.7

Pre-trip inspections should be done:

Differently each time in order to place emphasis on different items.
The same way each time to prevent you from forgetting anything.
Once in a while.

Q.8

When boarding a school bus, students should:

Be in a single-file line.
Be in pairs.
Not use the handrail.

Q.9

If a bus must be evacuated, it is safest for students to:

Stand no more than 50 feet away from the bus.
Stand downwind of the bus in the event of a fire.
Be led far away from any railroad tracks.

Q.10

A blind spot extends at least ____ behind a school bus.

10 feet
50 feet
100 feet
1,000 feet

Q.11

A post-trip inspection should include all of the following, except:

Looking for articles left on the bus.
Checking for sleeping students.
Opening windows.

Q.12

The loading of a school bus:

Is not a dangerous process.
Does not need to be supervised.
Should be done quickly.
Can be dangerous.

Q.13

If you must drive in reverse at a student pick-up point, you should:

Back up before the students board the bus.
Back up after the students board the bus.
Back up while students direct you.

Q.14

If you must drive a school bus during periods of high winds, you should:

Loosen your grip on the steering wheel.
Increase your speed.
Reduce your speed.
Drive normally.

Q.15

ABS helps you:

Lock up the wheels.
Keep the wheels from locking up.
Count the number of students boarding the bus.
Predict the weather.

Q.16

During the vehicle inspection test, you will be required to do all of the following, except:

Walk around the vehicle.
Point to or touch each item.
Explain what you are checking and why.
Crawl under the vehicle.

Q.17

During the pre-trip inspection test, you will be:

Expected to explain your knowledge of the pre-trip process.
Watching someone else check your vehicle.
Watching a film on how to inspect a vehicle.
Changing all the tires on your vehicle.

Q.18

The overhead rearview mirror is located:

On the outside left of the bus.
On the outside right of the bus.
Above the windshield inside the bus.

Q.19

If equipped with flashing lights, how far in advance of a school bus stop should the bus's lights be activated?

At least 50 feet
At least 100 feet
At least 200 feet
At least 1,000 feet

Q.20

If a gate controlling a railroad crossing does not go back up after a train passes, you should:

Drive around the gate.
Wait for another vehicle to cross the tracks first to see if it is safe.
Call your dispatcher.

0 h : 0 m : 1 s