Colorado CDL Bus 2 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

There are blind spots ____ left and right side flat mirrors.

Immediately below
In the middle of
Above
To the left of

Q.2

When stopping to pick up students, a bus driver should:

Place the vehicle in park.
Place the vehicle in first gear.
Place the vehicle in reverse.
Place the vehicle in third gear.

Q.3

During a basic vehicle control skills test, you may be asked to:

Parallel park.
Inspect your tires.
Monitor your gauges.
Pull forward into a parking space.

Q.4

When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?

Not driving over curbs or sidewalks
Stopping behind crosswalks
Driving in the leftmost lane if more than one driving lane is available
Finishing a right turn in the rightmost lane

Q.5

When alley docking, your vehicle should be parked:

With the front bumper on top of the front boundary line.
With the rear wheels over the rear boundary line.
Straight within the boundaries of the parking space.
At an angle within the boundaries of the parking space.

Q.6

Before evacuating a bus in response to a hazard, a driver should:

Ask the students if they want to leave.
Explain the hazard to the dispatcher and make a decision on how to respond.
Tell students to panic.
Have students open all the windows.

Q.7

During the steering box portion of the vehicle inspection test, you should not:

Ensure that the steering box is securely mounted.
Ensure that the steering box is free of leaks.
Look for missing bolts in the steering box.
Assume all cotter keys are present.

Q.8

While students load and unload a bus, the driver should:

Read a book.
Watch the process and keep an eye on the students.
Talk to other bus drivers.
Listen to the radio.

Q.9

The overhead inside mirror should be adjusted to see:

Outside of the driver’s side of the bus.
All of the students on the bus.
Students in the first four rows of the bus.
In front of the bus.

Q.10

Properly adjusted outside convex mirrors should allow the driver to see:

Where the front of each rear tire touches the ground.
Where the front of each front tire touches the ground.
The top of the bus.
The muffler.

Q.11

If equipped, a header board should:

Be damaged.
Be loose.
Be strong enough to contain cargo.
Light up when the engine is started.

Q.12

During the straight line backing exercise, how many times are you permitted to exit the vehicle to check its position?

One time
Two times
Three times
Four times

Q.13

When driving on the expressway during the skills test, you should:

Switch lanes frequently.
Use your mirrors to check traffic as needed.
Drive on the left side of the lane.
Drive above the posted speed limit.

Q.14

If approaching a railroad crossing while driving a placarded vehicle, you should always:

Activate your four-way flashers.
Stop within five feet of the tracks.
Change gears while on the tracks.
Change lanes while on the tracks.

Q.15

If a school bus needs to be evacuated, passengers should:

Always use the rear door.
Always use the windows.
Always use the front door.
Use the exit deemed safest.

Q.16

When approaching a railroad crossing while operating a school bus, you should generally:

Stop between 15 and 50 feet before the nearest rail.
Stop 100 feet before the nearest rail.
Stop 10 feet before the nearest rail.
Continue across the tracks without stopping.

Q.17

During a vehicle inspection, be sure that:

The emergency exits are difficult to open.
The emergency exit warning devices work properly.
The emergency exits squeak.
The emergency exits are not accessible from inside the cab.

Q.18

When asked about the vehicle's oil during the vehicle inspection test, you must be able to do all of the following, except:

Indicate where the dipstick is located.
Show that the oil level is within a safe operating range.
Show that the oil level is above the refill mark.
Show that the oil level is below the refill mark.

Q.19

A blind spot extends at least ____ behind a school bus.

10 feet
50 feet
100 feet
1,000 feet

Q.20

When inspecting engine compartment belts during the vehicle inspection test:

The belts should be checked for snugness, each with up to three inches of play.
The water pump belt does not need to be identified.
The air compressor belt should be removed.
The applicant must identify which items are not belt-driven, if any.

0 h : 0 m : 1 s