Georgia CDL Bus 2 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

The drive shaft should:

Be bent toward the passenger side.
Be bent toward the driver’s side.
Be bent to one side or the other.
Not be bent.

Q.2

Students should board a school bus:

In a single-file line.
Two at a time.
In as large a group as possible.
However they want to. It makes no difference.

Q.3

When checking the air and electrical lines during a vehicle inspection, all of the following should be true, except:

The air hoses are making a hissing noise.
The air hoses and electrical lines are not cut.
The air lines are not pinched.
The air lines are not dragging against tractor parts.

Q.4

During the steering box portion of the vehicle inspection test, you should not:

Ensure that the steering box is securely mounted.
Ensure that the steering box is free of leaks.
Look for missing bolts in the steering box.
Assume all cotter keys are present.

Q.5

During the skills test, if making a turn that requires a stop, you should:

Skid to a stop.
Stop after the stop line to get a better view.
Allow your vehicle to roll.
Keep the front wheels aimed straight ahead.

Q.6

The loading of a school bus:

Is not a dangerous process.
Does not need to be supervised.
Should be done quickly.
Can be dangerous.

Q.7

Why should a school bus stop a short distance from students who are waiting to board?

The students will have to walk to the bus, making it easier for the driver to watch their movements.
The students will usually be waiting on a sidewalk.
The students may get scared of a school bus coming toward them.
Buses are difficult to drive.

Q.8

When inspecting engine compartment belts during the vehicle inspection test:

The belts should be checked for snugness, each with up to three inches of play.
The water pump belt does not need to be identified.
The air compressor belt should be removed.
The applicant must identify which items are not belt-driven, if any.

Q.9

If a school bus needs to be evacuated, passengers should:

Always use the rear door.
Always use the windows.
Always use the front door.
Use the exit deemed safest.

Q.10

When taking the basic vehicle control skills test:

Points are deducted for each pull-up.
A driver is allowed three pull-ups per maneuver.
A pull-up will earn points only if the driver gets out of the vehicle before pulling up.
Only an excessive number of pull-ups will be counted as errors.

Q.11

If driving a school bus, your four-way flashers should:

Be activated before crossing railroad tracks.
Never be used.
Only be used after crossing railroad tracks.
Only be used near railroad tracks if a train is approaching.

Q.12

When checking the power steering fluid during a vehicle inspection, you will need to do each of the following, except:

Show where the power steering fluid dipstick is located.
Check for adequate power steering fluid.
Ensure that the power steering fluid level is above the full mark.
Ensure that the power steering level is above the refill mark.

Q.13

When entering traffic on an expressway during the skills test, you should:

Check for traffic.
Not use signals.
Abruptly enter a lane of traffic.
Cut off other drivers if needed.

Q.14

During a basic vehicle control skills test, you may be asked to:

Parallel park.
Inspect your tires.
Monitor your gauges.
Pull forward into a parking space.

Q.15

What do outside crossover mirrors allow a driver to see?

The front bumper
The rear bumper
The right side of the bus
The left side of the bus

Q.16

The overhead inside mirror should be adjusted to see:

Outside of the driver’s side of the bus.
All of the students on the bus.
Students in the first four rows of the bus.
In front of the bus.

Q.17

When performing a pre-trip inspection, you should make sure that:

The pedal surface has been smoothed out.
The gas pedal sticks.
Nothing is obstrucing the pedals.
There is something underneath the brake pedal.

Q.18

When crossing railroad tracks, you should:

Not stop.
Try to pass slower vehicles.
Change lanes.
Put the vehicle in neutral.

Q.19

Properly adjusted outside convex mirrors should allow the driver to see:

The entire side of the bus up to the mirror mounts.
The front of the bus.
The rear door of the bus.
The top of the bus.

Q.20

There are blind spots ____ left and right side flat mirrors.

Immediately below
In the middle of
Above
To the left of

0 h : 0 m : 1 s