Idaho CDL Hazmat 2 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

Pre-trip inspections should be done:

Differently each time in order to place emphasis on different items.
The same way each time to prevent you from forgetting anything.
Once in a while.

Q.2

If the words "Inhalation Hazard" appear on shipping papers:

An inhalation hazard placard must be used, but only if more than 100 pounds of the material are being transported.
An inhalation hazard placard must be used when any amount of the material is being transported.
Air masks must be provided to anyone handling the cargo.

Q.3

A material’s hazard class reflects:

The risks associated with the material.
How quickly the material must reach its destination.
How much the material weighs.

Q.4

When completing an offset back/left parking maneuver, a driver should:

Pull straight forward, then back to the left.
Drive straight back, then pull forward to the left.
Pull straight forward, then drive straight back.

Q.5

The National Response Center must be notified of an incident resulting in any of the following, except:

Death.
Injury requiring hospitalization.
Injury not requiring hospitalization.

Q.6

If transporting hazardous materials, a shipper should warn others by:

Posting HazMat placards on their truck.
Putting flashing lights on their truck.
Sounding a siren.

Q.7

A placard identifying hazardous materials must be placed:

Inside the trailer.
Inside the cab.
On the outside of the vehicle.

Q.8

During a basic vehicle control skills test, a look is when:

A driver checks the gauges on their instrument panel.
A driver checks their blind spots.
A driver walks to the back of their vehicle to check its position.

Q.9

If you're transporting explosives and your vehicle breaks down, you should notify other drivers:

With flares.
With reflective triangles.
By standing on the roadway and waving your arms.

Q.10

A placard indicating hazardous materials is which shape?

Diamond
Triangle
Circle

Q.11

What does a shipping paper describe?

The materials being transported
How the materials will be transported
Who should accept the materials being transported

Q.12

If you notice a cargo leak, you should identify the leaking hazardous materials by:

Smelling the materials.
Touching the materials.
Using the shipping papers.

Q.13

____ are used to warn others of hazardous materials.

Placards
Flashing lights
Color-coded pieces of tape

Q.14

To complete a Uniform Hazardous Waste Manifest, you must:

Sign the manifest by hand.
Only sign the manifest if you cross into another state.
Have a witness sign the manifest.

Q.15

During a basic vehicle control skills test, you may be asked to:

Swerve to avoid a hazard.
Parallel park.
Drive straight into a parking space.

Q.16

The power unit of a placarded vehicle must carry a fire extinguisher with a minimum rating of:

10 B:C.
30 B:C.
40 B:C.

Q.17

Placards must be placed:

Within three inches of other markings.
So words or numbers are read from left to right.
Upside down.

Q.18

If corrosive materials leak in a trailer, the trailer should be:

Cleaned with acid.
Cleaned with water.
Left to air dry without washing.

Q.19

When loading compressed gas, the liquid discharge valves should be:

Closed.
Greased.
Opened.

Q.20

If "Inhalation Hazard" appears on a shipping paper, the shipper should provide which placard?

Liquid
Poison Gas or Poison Inhalation Hazard
Reportable Quantity

Q.21

When loading compressed gas, the liquid discharge valves should be:

Closed.
Removed.
Opened.

Q.22

During the driving test, the examiner will be scoring you on:

How well-spoken you are.
How quickly you arrive to your destination.
General driving behavior.

Q.23

If taking the driving test and the route does not include a railroad crossing, you:

Will not have to do anything related to a crossing.
May have to explain how you would cross railroad tracks.
Will have to take the test again on a route that does include a railroad crossing.

Q.24

When asked to make a turn while taking your driving test, you should:

Use your turn signal, but only if other cars are present.
Check traffic only in the direction of the turn.
Check traffic in all directions.

Q.25

Placards showing the type of hazardous materials in a vehicle are usually which shape?

A tall rectangle
A triangle
A diamond

Q.26

As a driver, which of the following is not your job at the scene of an accident?

Keeping people away from the scene.
Taking heroic measures to put the fire out.
Communicating the danger of the hazardous materials to response personnel.

Q.27

____ is responsible for properly labeling hazardous materials.

The shipper
The loader
The driver

Q.28

When alley docking, you should first:

Position your vehicle directly in front of the alley.
Back up directly in front of the alley.
Stop parallel to the outer boundary of the alley.

Q.29

When completing an offset back/right parking maneuver, you should:

Pull straight forward, then drive straight back.
Drive straight back, then pull forward to the left.
Pull straight forward, then back to the right.

Q.30

During the driving test, when asked to make a lane change:

You should not be concerned with other motorists.
You should use your turn signal and change lanes when safe.
You should make the lane change as quickly as possible, even if that means cutting off another driver.

0 h : 0 m : 1 s