Q.1
If "Inhalation Hazard" appears on a shipping paper, the shipper should provide which placard?
Q.2
When Division 1.3 materials are being transported, the floor liner should be:
Q.3
Shippers package in order to ____ hazardous materials.
Q.4
Many products classed as poison are also:
Q.5
Unless the package is clearly unsafe, a driver needs ____ to accept a package.
Q.6
In addition to reading the manual, the best way to learn about transporting hazardous materials is to:
Q.7
If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials may need to be:
Q.8
To transport hazardous materials, what does a driver need?
Q.9
If transporting hazardous materials, a shipper should warn others by:
Q.10
If a package of hazardous materials is not large enough to hold a label, it should be labeled:
Q.11
If your engine runs a pump used during delivery of compressed gas, you should turn off the engine:
Q.12
A clue that your shipment contains hazardous materials is that:
Q.13
Placards showing the type of hazardous materials in a vehicle are usually which shape?
Q.14
____ is responsible for properly labeling hazardous materials.
Q.15
An improperly placarded vehicle:
Q.16
A manifest for transporting hazardous waste:
Q.17
To transport hazardous materials, a driver needs:
Q.18
A hazardous material's identification number should appear:
Q.19
A material’s hazard class reflects:
Q.20
A driver should ensure that:
Q.21
Who must label hazardous materials?
Q.22
Shipping papers should be:
Q.23
If a package of explosives has an oily stain or shows dampness, the driver should:
Q.24
When applying for an original or renewed HazMat endorsement, you must undergo a background check through which agency?
Q.25
Class 1, Class 2.1, and Class 3 materials should not be placed in a trailer with:
Q.26
A shipping paper:
Q.27
When traveling with Division 1.1 explosives, you may park no closer than ____ from the nearest building.
Q.28
If a shipping paper describes both hazardous and non-hazardous materials:
Q.29
Load hazardous materials:
Q.30
In general, before loading or unloading any flammable liquids, an engine should be:
0 h : 0 m : 1 s