Nevada CDL Bus 1 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

If you are stopped at a railroad crossing while operating a school bus, you should:

Prepare to proceed as soon as a train passes.
Ignore signs and signals.
Open the door to listen for approaching trains.

Q.2

What should be used to check for proper tire inflation?

A tire gauge
A tire iron
An air compressor
A lug nut

Q.3

While students load and unload a bus, the driver should:

Read a book.
Watch the process and keep an eye on the students.
Talk to other bus drivers.
Listen to the radio.

Q.4

How far in advance of a school bus stop should a bus's lights be activated?

2 to 4 seconds
5 to 10 seconds
45 seconds

Q.5

In the event of a bus evacuation, students should be led at least ____ away from the road.

10 feet
20 feet
50 feet
100 feet

Q.6

If a driver needs to exit a school bus to ensure all waiting students have boarded, the driver should:

Leave the bus running.
Turn the bus off and take the key.
Ask a student to keep an eye on the steering wheel.

Q.7

When approaching a school bus stop, the bus driver should:

Not use their mirrors.
Approach the stop with caution.
Stop on the sidewalk.

Q.8

When exiting your vehicle, you must maintain ____ with the vehicle at all times.

One point of contact
Four points of contact
Three points of contact
Two points of contact

Q.9

If your vehicle's ABS is malfunctioning:

You will not have any working brakes.
You will still have brakes.
You should only use the parking brake.

Q.10

When encountering a railroad crossing during the driving test, you should:

Pass another vehicle on the tracks if the other vehicle is moving too slowly.
Change lanes while on the tracks.
Not change gears while on the tracks.

Q.11

The drive shaft should:

Be bent toward the passenger side.
Be bent toward the driver’s side.
Be bent to one side or the other.
Not be bent.

Q.12

After students unload at the school, a driver should:

Not be concerned with the students' whereabouts.
Leave after the students have entered the school building.
Walk through the bus to check for any sleeping students.

Q.13

When alley docking, your vehicle should be parked:

With the front bumper on top of the front boundary line.
With the rear wheels over the rear boundary line.
Straight within the boundaries of the parking space.
At an angle within the boundaries of the parking space.

Q.14

The loading of a school bus:

Is not a dangerous process.
Does not need to be supervised.
Should be done quickly.
Can be dangerous.

Q.15

During the pre-trip inspection test, you will be:

Expected to explain your knowledge of the pre-trip process.
Watching someone else check your vehicle.
Watching a film on how to inspect a vehicle.
Changing all the tires on your vehicle.

Q.16

When operating a school bus, mirrors should be adjusted:

During the drive.
Before beginning to drive.
After the drive is completed.

Q.17

When students are boarding a school bus, the driver should do all of the following, except:

Let students know when it is safe to board.
Count the number of students at the bus stop and ensure that all have boarded.
Allow student to board in pairs.
Check all mirrors for students rushing toward the bus.

Q.18

To safely unload a bus, students should:

Remain seated until they are told to exit.
Stand up and head toward the door while the bus is slowing down.
Exit the bus and stand directly next to the bus while it is being driven away from the stop.

Q.19

Active railroad crossings:

Have traffic control devices installed.
Do not have any traffic control devices installed.
Are crossed by at least 10 vehicles every hour.

Q.20

During the driving test, the examiner will be scoring you on:

How well-spoken you are.
How quickly you arrive to your destination.
General driving behavior.

0 h : 0 m : 1 s