Texas CDL Hazmat 2 - DMV Written Test Questions with Answers - MCQGeeks.com

Q.1

What should be done if the third column of the Hazardous Materials Table contains the word “Forbidden?”

The indicated substance should not be transported.
The indicated substance should be transported by air.
The indicated substance should only be transported at night.
The indicated substance should be accompanied by a security guard.

Q.2

Identification numbers, shipping names, and hazard classes:

Should be abbreviated on a shipping paper if a small piece of paper is being used.
Should be abbreviated on a shipping paper to make them easier to read.
Should not be abbreviated on a shipping paper.
Should only be abbreviated on a shipping paper if the abbreviations are easy to understand.

Q.3

If transporting explosives, you may leave your vehicle unattended:

In a rest area.
At a truck stop.
On private property.
In a safe haven.

Q.4

An improperly placarded vehicle:

Can never be moved.
Can only be moved in an emergency.
Can be driven short distances.
Can be driven if it does not contain radioactive materials.

Q.5

An improperly placarded vehicle can only be moved:

To make room for other vehicles.
During an emergency.
If the vehicle will be traveling a distance shorter than 10 miles.
To wash the vehicle.

Q.6

If cargo is leaking, you should:

Touch the leaking material to identify the cargo.
Use shipping papers and labels to identify the leaking cargo.
Assume all the cargo is leaking.
Spray the leaking containers with water.

Q.7

When transporting Division 1.1 materials, the floor liner should be:

Made from metallic materials.
Made from an iron alloy.
Made from non-ferrous materials.
Loose.

Q.8

If transporting a package that contains radioactive materials, it is important to know that:

Radiation will pass through to other packages.
The package should be placed in the cab.
The package should be loaded on its side.
The package should be made of wood.

Q.9

Unless it is clearly unsafe, what does a driver need to accept a package?

The shipper’s certification
A notarized statement
A verbal agreement
A contract

Q.10

How many hazardous materials classes are there?

Four
Six
Nine
Two

Q.11

How is a hazardous materials warning presented?

On a placard
By wrapping the package in orange
By placing the item away from other cargo and covering it with a sign
With flashing lights

Q.12

Hazardous materials laws are controlled by:

Local regulations.
State regulations.
Federal regulations.
All levels of government.

Q.13

Shipping papers should be:

Hidden from view.
Placed in the glove box.
Easily seen by anyone entering the cab.
Laminated.

Q.14

The identification number associated with a hazardous material should appear:

On the material's packaging.
On the vehicle's license plate.
Directly next to a placard.
On a bumper sticker on the vehicle.

Q.15

____ identical placards must be placed on a vehicle transporting hazardous materials.

One
Two
Three
Four

Q.16

If corrosive materials leak in the trailer, the trailer should be:

Cleaned with acid.
Cleaned with water.
Left to air-dry without washing.
Cleaned with bleach.

Q.17

When traveling with Division 1.1, 1.2, or 1.3 explosives, the vehicle should not be:

Parked within 300 feet of a bridge.
Parked within 40 feet of the road.
Parked for only short periods of time.
Parked on grass.

Q.18

When loading hazardous materials, you should do all of the following, except:

Set the parking brake.
Load the materials away from heat.
Watch for signs of leakage.
Use a hook.

Q.19

Who is required to provide training for a driver who will transport hazardous materials?

The local government
The state motor vehicle department
The state highway patrol
The driver's employer

Q.20

If there is a collision involving a vehicle transporting Class 1 explosives, the driver should:

Not warn others of the danger.
Allow smoking near the vehicle.
Keep the explosives inside the vehicle until after separating the vehicles involved in the collision.
Remove the explosives from the vehicle before separating the vehicles involved in the collision.

Q.21

On packages that are not large enough to hold a HazMat label, materials should be labeled:

With a barcode.
With a tag.
With a piece of orange tape.
With a red checkmark.

Q.22

In addition to reading the manual, the best way to learn about transporting hazardous materials is to:

Talk to other people.
Attend hazardous materials training courses.
Guess.
Ask a police officer.

Q.23

A clue that your shipment contains hazardous materials is that:

The shipper is in a certain type of business, such as a fireworks dealer or pest control firm.
The last shipment you picked up was labeled as hazardous.
The packaging looks damaged.
The shipper's business is located in a bad part of town.

Q.24

When loading or unloading explosive materials, you should:

Keep the engine running.
Turn off the engine.
Use sharp-pointed tools to open the packages.
Toss packages.

Q.25

When a shipper packages hazardous materials, they certify that the package:

Does not contain hazardous materials.
Has been prepared in compliance with the rules.
Was packed at a specific location.
Will be placed on the trailer first.

Q.26

To complete a Uniform Hazardous Waste Manifest, you must:

Sign by hand.
Sign, but only if you cross into another state.
Sign, but only if the weather was hazardous.
Have a witness sign.

Q.27

The only way to properly check tire pressure is by:

Using a tire pressure gauge.
Eyeballing the tire.
Pushing on the tire with your hand.
Measuring the height of the tire.

Q.28

If you are transporting Class 3 flammable liquids and your cargo needs to be moved into another tank, the flammable liquids:

May be transferred on the roadway as long as no other people are nearby.
Should not be transferred on a public road, unless under emergency circumstances.
Should be kept secret when they are being moved to another tank.
Should be transferred at night.

Q.29

Materials that are considered hazardous may include all of the following, except:

Explosives.
Gases.
Solids.
Rocks.

Q.30

When loading compressed gas, the liquid discharge valves should be:

Closed.
Greased.
Open.
Removed.

0 h : 0 m : 1 s