Q.1
Before a vehicle with dual air brakes is driven, pressure of at least ____ should be built up in both braking systems.
Q.2
Service brakes should:
Q.3
Why should you regularly drain the air tanks?
Q.4
Truck tractors with air brakes built on or after March 1, 1997 must have:
Q.5
During an inspection, slack adjusters on S-cam brakes should not move more than:
Q.6
A driver can rely on front wheel braking to work:
Q.7
When parking, you should not use the parking brake if:
Q.8
How should you test the low pressure warning signal?
Q.9
Friction inside a brake drum is caused when the brake shoes and linings:
Q.10
When you press the brake pedal in a vehicle with S-cam brakes, air pressure pushes out the rod and moves the:
Q.11
The ____ between an air compressor and reservoir tank prevents air from escaping if the air compressor has a leak.
Q.12
Some air brake systems use alcohol:
Q.13
Applying the brake pedal causes air pressure to activate an electric switch and:
Q.14
Before driving a vehicle with air brakes, you should ensure that the ____ come on automatically when air pressure falls below 45 psi.
Q.15
Anti-Lock Braking Systems (ABS):
Q.16
If using spring brakes when hauling a heavy load, a complete stop will:
Q.17
While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.
Q.18
When only the tractor is equipped with an Anti-Lock Braking System (ABS):
Q.19
What does an air compressor do in an air brake system?
Q.20
What is removed when an air tank is drained?
Q.21
What can happen if the air pressure gets too low in an air brake system?
Q.22
What do anti-lock brakes do?
Q.23
The leakage rate for a triple combination vehicle with air brakes should be no more than ____ in one minute during a static leakage test.
Q.24
To inspect slack adjusters on S-cam brakes, you need to:
Q.25
What is brake lag?
0 h : 0 m : 1 s