MCQGeeks
0 : 0 : 1
CBSE
JEE
NTSE
NEET
English
UK Quiz
Quiz
Driving Test
Practice
Games
Quiz
Electrical Engineering
Maintenance & Testing Of Electrical Equipments
Quiz 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Q.1
During the troubleshooting of a PC that will not boot, it is suspected that the problem is with the RAM modules. The RAM modules are removed and put into another PC, which successfully powers on. The RAM modules are then put back into the original PC and it now successfully powers on as well. What was the most likely cause of the problem?
The RAM modules were not seated firmly.
The RAM modules were inserted backwards into the DIMM slots.
The RAM modules did not match the PC specs.
The RAM modules have bad blocks.
Q.2
A measuring instrument which is used to measure the electric current in a circuit is known,
Voltmeter
Ammeter
Wattmeter
Resistance reading
Q.3
The instrument used to measure small value of resistance are,
micro-ohmmeters
centi-ohmmeters
nano-ohmmeters
deca-ohmmeters
Q.4
A wrapping wire is then prepared using size No.bare conductors terminating beyond the bent of tap wire and up to the installation of the main conductor.
Tap three joint
Rattail joint
Western Union
None of these
Q.5
This splice is applied both inside and outside of the building to the big solid wire where twisting is difficult, but there is equipment to lessen the difficulty of doing this kind of splice
Rattail joint
Britannica
Tap joint
All of above
Q.6
Also known as a twist splice or a pig-tail splice, is a very basic electrical splice that can be done withboth solid, stranded wire.
Retail joint
Western Union
Britannia
None of these
Q.7
The tool is made of a long wooden stick, attached to a block of metal. It can be used for driving nails, breaking objects, and forging metal.
pliers
hammer
wrench
None of these
Q.8
Is one of the most basic of the pattern making rulers. This ruler helps to create accurateangles and straight edges. It measures, rules, and squares simultaneously.
l-square
ruler
Tape measure
None of these
Q.9
They are useful in taking a room or wall measurements that usually used in industrial arts.
Tape measure
ruler
medida
Both A & B
Q.10
Device used to hold or secure objects tightly together to prevent movement or separation via an inward application.
clamp
pliers
wrench
Both A & B
Q.11
They can be used to screw or unscrew nails on any surface, to tighten the hinges, install light switches, or assemble furniture.
wrench
pliers
screw driver
All of above
Q.12
They are useful in every situation, be it for a school project, in the kitchen, a DIY job, or anything you need. It can be useful in opening packages or boxes.
knife
scissors
pliers
All of above
Q.13
These are built with hard material and can be used for opening boxes, letters, or cutting, not so tough materials.
knife
l-square
measuring tape
None of these
Q.14
A common hand tools found in almost every household. They help to hold objects firmly, bend other materials, and remove unwanted elements.
Pliers
Screw driver
Hammer
All of above
Q.15
This tool is used to grip and turn objects. They are helpful in assembling furniture or bike repairs where it can be used to loosen or tighten nuts and bolts.
wrench
Pliers
hammer
All of above
Q.16
Adverse health effect
is the chance or the probability that a person will be harmed.
caused by organism such as viruses, bacteria fungi and parasites
decrease in life span
safety hazard
Q.17
The most destructive contaminants to the lubrication system.
Dust
Dirt
Rust
All of above
Q.18
Effects from lack of lubrication.
Shorten equipment lifetime
Equipment damage
Increase maintenance cost
Downtime
All of above
Q.19
This splice is applied both inside and outside of the building to the big solid wire where twisting is difficult, but there is equipment to lessen the difficulty of doing this kind of splice.
Rattail joint
Western Union
Britannica
All of above
Q.20
It is use to compressed air to flow into the jack cylinder and causes the ram to extend and raise the vehicle.
Air racket
Pneumatic Torque Wrench
Pneumatic floor jack
Air Drill
0 h : 0 m : 1 s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Report Question
×
What's an issue?
Question is wrong
Answer is wrong
Other Reason
Want to elaborate a bit more? (optional)
Support mcqgeeks.com by disabling your adblocker.
×
Please disable the adBlock and continue.
Thank you.
Reload page