Q.1
It refers to the technical person who has the knowledge and skills about the technology.
  • Visual Inspection
  • Persons Involved
  • Power Supply
  • Functionality
Q.2
Vibration or extra noise from the operation means problems with parts and accessories are starting to develop.
  • Visual Inspection
  • Persons Involved
  • Performance
  • Functionality
Q.3
When there is something wrong with the performance of either hand tools or equipment, they need immediate repair or maintenance.
  • Visual inspection
  • Persons Involved
  • Performance
  • Power supply
Q.4
This refers to the visual observation of an expert on the appearance of the tools and equipment.
  • Visual inspection
  • Performance
  • Persons involved
  • Power supply
Q.5
It is lighter than a comparable electric drill.
  • Air Drill
  • Pneumatic Torque Wrench
  • Electric Drill
  • Air racket
Q.6
The uses of the sockets and attachment from a standard socket set.
  • Vacuum Cleaner
  • Pneumatic Torque Wrench
  • Electric Drill
  • Air racket
Q.7
This is used for cleaning the floor and car interiors after service.
  • Vacuum Cleaner
  • Grinding Tool
  • Electric Drill
  • Air chisel
Q.8
This can be either bench-mounted or installed on a pedestal
  • Electric drill
  • Vacuum cleaner
  • Pneumatic Torque Wrench.
  • Grinding tool
Q.9
These are used to drive or turn screws
  • Pullers
  • Wrenches
  • Hammers
  • Screwdrivers
Q.10
These are used to remove gears and hubs from shafts, bushings from blind holes, and cylinder liners from engine blocks.
  • Screwdrivers
  • Wrenches
  • Hammers
  • Pliers
Q.11
These are used to turn screws, nuts, and bolts with hexagonal or six-sided heads. A variety of wrenches are used in the shop.
  • Wrenches
  • Screwdrivers
  • Hammers
  • Pliers
Q.12
These are designed around three basic devices: the air cylinder, the vane motor, and the sprayer.
  • Power Tools
  • Hand Tools
  • Machine Tools
  • Pneumatic Tools
Q.13
These are tools manipulated by our hands and with the use of electrical energy such as electric drill, grinding wheels, vacuum cleaner, and others.
  • Power Tools
  • Hand Tools
  • Pneumatic Tools
  • Electrical Tools
Q.14
These are tools manipulated by hands without using electrical energy such as puller, hacksaw, pull-push rule, pliers, hammer and others.
  • Hand Tools
  • Power Tools
  • Pneumatic Tools
  • Electrical Tools
Q.15
Under which of the following conditions is generated staticelectricity decreased?
  • Dry air
  • Humid air
  • Cold air
  • Hot air
Q.16
The generation of static electricity on an object by rubbing is known as the
  • electrostatic charge
  • dielectric effect
  • triboelectric effect
  • prime charge
Q.17
Which of the following types of meters are contained in themultimeter?
  • Voltmeter, frequency meter, and ohmmeter
  • Frequency meter, ammeter, and voltmeter
  • Frequency meter, ohmmeter, and ammeter
  • Ammeter, voltmeter, and ohmmeter
Q.18
Which of the following conditions is the most probable cause for a grounded circuit?
  • A blown fuse
  • A tripped circuit breaker
  • Frayed insulation on wiring
  • Loose terminal lugs
Q.19
An ammeter is connected into a circuit in which of the following ways?
  • In parallel with the circuit
  • In series-parallel with the circuit
  • Both 1 and 2 above
  • In series with the circuit
Q.20
Which of the following meters should you use when troubleshooting an open circuit?
  • Voltmeter
  • Wattmeter
  • Ohmmeter
  • Ammeter
0 h : 0 m : 1 s