Q.1
The amount of output measured beyond the final steady output value in response to a step change in the measurand is called?
  • a) range
  • b) overshoot
  • c) span
  • d) none of the mentioned
Q.2
____________ is the maximum deviation of any calibration point, obtained for either increasing or decreasing input, obtained for either increasing or decreasing input, from the best fit straight line having overall minimum deviation.
  • a) Linearity
  • b) Rise time
  • c) Span
  • d) None of the mentioned
Q.3
____________ is the maximum difference in output for the same measurand value within the range of a measuring device, one obtained by increasing from zero and other by decreasing from a higher value of the measurand.
  • a) Linearity
  • b) Hysteresis
  • c) Span
  • d) None of the mentioned
Q.4
The algebraic difference between the indicated or observed value and the true value of the measurand is the ______________
  • a) range
  • b) overshoot
  • c) error
  • d) none of the mentioned
Q.5
The random changes in output under constant measurand and normal operating conditions is called the ______________
  • a) range
  • b) drift
  • c) error
  • d) none of the mentioned
Q.6
_______________ is a test during which standard values of measurand are applied to the measuring device and the corresponding output readings are compared with the standard values.
  • a) Linearity
  • b) Hysteresis
  • c) Calibration
  • d) None of the mentioned
Q.7
________________ is the time during which a device or system is insensitive, after receiving a stimulus, to any other impulse or stimulus.
  • a) Dead time
  • b) Hysteresis
  • c) Calibration
  • d) None of the mentioned
Q.8
______________ is the utilization of supplemental device, materials, or processes to minimize known sources or error.
  • a) Dead time
  • b) Compensation
  • c) Calibration
  • d) None of the mentioned
Q.9
A calibration during which the measurement varies with time in a specified manner and the output is recorded as a function of time is called ______________
  • a) dynamic calibration
  • b) drift
  • c) error
  • d) none of the mentioned
Q.10
Characteristics of a measuring device which relate to its response to variations of the measurand with time is called ______________
  • a) dynamic calibration
  • b) dynamic characteristics
  • c) error
  • d) none of the mentioned
0 h : 0 m : 1 s