Q.1
When dimensioning piping drawings, you give the lengths of all runs of this type:
Q.2
This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
Q.3
This is the range of digital or hard copy documents that specify the physical function requirements for a product:
Q.4
This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
Q.5
The principle reason for using an auxiliary view is ________.
Q.6
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
Q.7
In architectural drawing ________ are often used to illustrate and detail structural components.
Q.8
These are joined together in the field to build a structure:
Q.9
An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
Q.10
In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to _________.
Q.11
The MASSPROP shortcut will provide the following information.
Q.12
Baseline dimensions are referenced from a common geometric feature known as a ________.
Q.13
These are used to attach parts to a cylinder so they won't turn on it:
Q.14
Oblique drawings are dimensioned in a similar fashion as these types of drawings:
Q.15
This is a systematic approach that integrates the design and manufacture of products with the goal of optimizing the process:
Q.16
This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
Q.17
CAD programs which incorporate parametric modeling utilize a system in which the dimensions control the ________.
Q.18
The most common geometric form used in gears today is this:
Q.19
In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
Q.20
Approximately this much of the cost of product development and manufacture is determined at the design stage:
Q.21
If a plane is parallel to the plane of projection, it appears:
Q.22
An accurate record of changes made to release drawings is tracked via this:
Q.23
The site plan illustrates _________.
Q.24
This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
Q.25
This type of weld is the most common in structural steel fabrication:
Q.26
Acceptable parts must not extend beyond this:
Q.27
In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.
Q.28
Center lines are used to locate or represent the centers of ________.
Q.29
This type of thread is a thread on the inside of a member:
Q.30
The Offset tool should only be used for placing _________ in an isometric drawing.
0 h : 0 m : 1 s