Q.1
In a CAD system, you can draw an ellipse by specifying these:
Q.2
Geometric primitives include shapes such as ________.
Q.3
Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.
Q.4
This type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:
Q.5
This type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:
Q.6
Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.
Q.7
Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.
Q.8
When creating a block the drafter needs to pay particular attention to selecting a base point because it determines the __________.
Q.9
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
Q.10
This material is used in masonry construction, most commonly for ornamental facing:
Q.11
In an oblique drawing, equally spaced partial circles may be used to show this:
Q.12
This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
Q.13
When using the descriptive geometry method to create an auxiliary view the drafter should _________.
Q.14
This is used to indicate that a surface is to be machined:
Q.15
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
Q.16
If a designer is developing a plan for a project in which the entire part is made out of ¾" thick plywood and he only wants to use one view, he should use the ________ view.
Q.17
The default position of the UCS icon is positioned at ________ on the Auto-CAD grid.
Q.18
Spur gear design normally begins with selecting this:
Q.19
Oblique sections are useful to show this:
Q.20
This type of section is not in direct projection from the view containing the cutting plane:
Q.21
Dimension text is generally placed above the ________ line.
Q.22
A line with a tapering width can be easily created by using the ________ tool.
Q.23
When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:
Q.24
The first step in creating a traditional technical drawing is to ________.
Q.25
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
Q.26
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
Q.27
The lines used to create the auxiliary view should appear as ________ in the finished view.
Q.28
This is the intersection of the ground plane with the picture plane:
Q.29
A cylinder can be created by drawing a rectangular shape then the ________ tool.
Q.30
When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
0 h : 0 m : 1 s