Q.1
This type of solid has two bases that are parallel equal polygons:
Q.2
These breaks are used to shorten the view of an object:
Q.3
These drawings are given to contractors to perform work or manufacture individual parts:
Q.4
The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼" = 1'-0".
Q.5
This is a common method for connecting steel members of buildings and bridges:
Q.6
This type of drawing shows two lines representing the pipe diameter:
Q.7
A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
Q.8
In oblique projection, important shapes should be in this position relative to the viewing plane:
Q.9
This should show what changes were made, when, and by whom:
Q.10
This is how axonometric, oblique, and perspective sketches show objects:
Q.11
The foundation contractor will work with the following architectural plans.
Q.12
In this type of drawing, vertical pipes may be revolved into the horizontal plane:
Q.13
A half-moon protractor is divided into how many degrees?
Q.14
In an assembly section, these parts should have their section lines left out or shown solid black:
Q.15
This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:
Q.16
A Multiview sketch includes threesketches
  • True
  • False
Q.17
What does the symbol ↧ mean in a technical drawing?
  • Radius
  • Diameter
  • Depth
  • Tolerance
Q.18
A Multiview sketch starts with an isometric sketch
  • True
  • False
Q.19
What does ISO stand for when looking at conventional drawings?
  • Institute for Standards
  • International Science Organisation
  • International Standards Organisation
  • Independent Standards Organisation
Q.20
How big should a border be in an engineering drawing?
  • 10 mm
  • 10 cm
  • 100 mm
  • 1000 mm
Q.21
How big should a title block be in an engineering drawing?
  • 20mm
  • 20cm
  • 200mm
  • 2000mm
Q.22
How should dimensions be applied correctly on an engineering drawing?
  • Below the line.
  • Above the line.
  • At the left hand side of the line.
  • At the right hand side of the line.
Q.23
How should projection lines appear on an engineering drawing.
  • Lightly and extended beyond the drawing lines.
  • Dark and extended beyond the drawing lines.
  • Dotted and extended beyond the drawing lines.
  • Long and short dashed lines and extended beyond the drawing lines.
Q.24
What three-dimensional view is often used in engineering drawings?
  • Isometric View
  • Radial View
  • Orthographic View
  • Trigonometric Projection
Q.25
Engineering drawings are used in industry to ________________.
  • Look Cool
  • 3-D Print Parts
  • Communicate Part Information and Details
  • None of these are correct
Q.26
A dashed line on an engineering drawing indicates ____________ lines.
  • Drawing
  • Phantom
  • Center
  • Hidden
Q.27
Logic AND gates provides an output (on) when all its inputs are on, true or equal to 1.
  • True
  • False
Q.28
True or False: You are allowed to draw in your engineering notebook
  • True
  • False
Q.29
A thumbnail sketch is done on typing paper or cartesian graph paper
  • true
  • false
Q.30
A multiview sketch shows whichviews
  • top, middle, side
  • front, top, right
  • up, down, sideways
  • front, back, top, side
0 h : 0 m : 1 s