To insure that everyone understands what the electrical symbols represent it is customary to include a ____ on the electrical sheet.

The building construction industry relies on sets of ________ drawings to construct homes and commercial buildings.

On a floor plan the dashed line that appears approximately 24" outside the exterior wall represents the ________.

The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼" = 1'-0".

The architectural drafter usually begins a set of working drawings by creating the ________ plan first.

The site plan illustrates ________.

Once the architect has finalized the house plans with the client any changes to the design requested by the client will require a ________.

Generally, the units used on an architectural drawing are set to ________.

The foundation contractor will work with the following architectural plans.

Elevation drawings will include information about ________.

Developing the foundation plan is probably the starting point for creating a set of architectural plans.

Blocks are not an important element of architectural drawings.

A typical set of architectural working drawings would probably include floor plans, foundation plans, elevations, section details, and roof framing plans.

The symbols used on electrical plans represent the standard equipment used in homes and commercial buildings.

The floor plan is a bird's eye view of the house.

AutoCAD's Design Center is used to manage various block libraries used in architectural drawings.

If the roof pitch for a house is identified as 5/12 the height of the roof rises 2 ½" for every 14" of horizontal run.

Elevation views generally include the front, right side, back, and left side views.

A set of working drawings used to build a house is considered a legal document.

Although the drafter creates the working drawings, the accuracy of the set of drawings is most often the responsibility of the design architect.